top of page

LED Under Cabinet Lighting & Accessories

Standard Linear Strip Lighting

•  Code: LED-W

•  Color: Titanium gray frame

•  Color Temperature: 5000K color temperature (Cool White)

•  Sensor controls brightness and On/Off functions

•  Compatible with cabinet sizes: 9", 12", 15", 18", 21", 24", 27", 30", 33", 36", 39"

•  DC 24V, 12W/M

Shelf Lighting with Angled Edge Design

•  Code: LED-FS

•  Color: Titanium gray frame

•  Color Temperature: 5000K color temperature (Cool White)

•  Compatible with cabinet sizes: 24", 30", 36"

•  DC 24V, 1212W/M; Triangle Corner

LED Puck Light

•  Code: LED-PUCK COOL WHITE

•  Material: Satin Nickle Aluminum

•  Color: Aluminum silver-gray frame

•  Color temperature: 3-in-1 adjustable (3000K / 4000K / 5000K)

•  Rear manual switch for easy adjustment of color temperature and brightness

•  Includes connector cable, length 3.3 ft

LED Transformer

•  Code: LED Transformer (each cabinet set requires at least 1 transformer)

•  Built-in 6 ways Dupont female connector

•  One transformer supports up to 3 strips (30 ft); Add an extra transformer if a single run > 26 ft

•  Recommended to add extra transformer for L- & U-shaped kitchens for easier wiring

•  Includes power cords: Input 3.3 ft, Output 5 ft

•  Specs: Input Voltage: 100–240VAC, 50/60Hz; Output Voltage: DC 24V, 4A, 96W

•  Size: 230 × 74 × H15 mm

•  Certifications: UL, CSA 

LED Splitter

•  LED-Splitter

•  Functions: Connects transformer and distributes power to up to 6 LED strips

•  Connectors: Links transformer to LED strips (up to 6)

•  Output Channels: 6-way distribution

•  Cable: 39 in long white wire with connectors

•  Material: Durable, flame-retardant PC housing

LED Sensor

•  LED-Sensor

•  Includes: 1 end cap

•  Built-in Features: Hand wave activated sensor switch and dimmer

•  Usage: One sensor can typically control the entire cabinet lighting system; most users choose 1–2 sensors per setup

•  Note: Transformer has 6 output ports; plan sensor connections accordingly

•  Installation: LED strip cover may need to be cut to embed the sensor

bottom of page